Manual Accuracy vs. Machine Accuracy
Manual Accuracy vs. Machine Accuracy
- Published on Jul 9, 2025
- 1 minute(s) read
The Manual Accuracy vs Machine Accuracy chart reports accuracy metrics, for both humans and the machine, over a selected date range. Note that the chart reports on an occurrence level rather than on a field level.
To see additional performance metrics, hover your cursor over the data point of interest and a window will display the accuracy percentage and number of calculation points (human and machine) for a chosen date.
.png?sv=2026-02-06&spr=https&st=2026-07-27T09%3A18%3A46Z&se=2026-07-27T09%3A29%3A46Z&sr=c&sp=r&sig=hE4TpYYgHzGs563hOPCzx6mL0hId4ChQDyRDQzowXso%3D)
Filtering options
The following filtering options are available in the Manual Accuracy vs Machine Accuracy chart:
- Date range: by default, these figures are generated with the last week's data, but can be recalculated for a custom date range.
- Task type: Transcription, Field Identification, Table Identification, and Classification data can be reported. In v41.2 and later, you can also view data for Full Page Transcription and Vision Language Model tasks.
- Depending on the task type you select, other filters in this list may not be applicable and will not be shown.
- Field type: by default, all field types will be shown, but you can specify Text, Checkboxes, and/or Signature
- [v41.2 and later] Segment type: appears in place of the Field type filter if Full Page Transcription is selected for Task type. By default, all segment types will be shown, but you can specify Text, Checkboxes, and/or Signature.
- Flow: by default, all flows will be displayed, but you can specify one or more flows to report instead.
- Layout variation: by default, all layout variations will be displayed, but you can specify one or more layout variations to report instead.
- Entry type: by default, all entries will be displayed, but you can select Fields or Table Cells.
- Layout entry: after you’ve selected specific layout variations to show data for, you can further refine your results to show accuracy values for specific fields in Structured documents or for specific fields or table columns in Semi-structured documents. To learn more, see Transcription Accuracy and Automation and Identification Settings.
Settings
The Exclude Auto-transcribed Fields toggle allows you to exclude fields that were transcribed by the machine without Supervision, regardless of confidence.
Note that reporting data with excluded auto-transcribed fields is available only from the date of installing or upgrading to v35.